Hardware Question

[Mansur, Warren]

> When I set the 100mhz/133mhz FSB jumper to 133mhz it seems 
> like it boots 
> (no error beeps) but I get no video either from the onboard video or 
> from the AGP card I put in. If I set it to 100mzh it will 
> boot fine, but 
> my processor runs slower.
> 
> I thought that the ram freq should be separate from the CPU 
> freq, but I 
> could be wrong.. that's why I asking.

Also, if you can change the multiplier setting for your CPU, you could lower your bus to 100Mhz and but keep the speed of the CPU the same.