How do you determine the amount of system memory?
Paul Lussier
p.lussier at comcast.net
Tue Jul 29 12:59:12 EDT 2008
Dave Johnson <dave-gnhlug-list at davej.org> writes:
> $ sensors
> eeprom-i2c-0-52
> Adapter: SMBus I801 adapter at e8a0
> Memory type: DDR2 SDRAM DIMM
> Memory size (MB): 2048
>
> eeprom-i2c-0-50
> Adapter: SMBus I801 adapter at e8a0
> Memory type: DDR2 SDRAM DIMM
> Memory size (MB): 2048
I can't get this output... I, for some reason, only see things like this:
w83627hf-i2c-0-2d
ERROR: Can't get adapter or algorithm?!?
VCore 1: +4.08 V (min = +4.08 V, max = +4.08 V)
VCore 2: +4.08 V (min = +4.08 V, max = +4.08 V)
+3.3V: +4.08 V (min = +4.08 V, max = +4.08 V)
+5V: +6.85 V (min = +6.85 V, max = +6.85 V)
+12V: +15.50 V (min = +15.50 V, max = +15.50 V) (beep)
-12V: +6.06 V (min = +6.06 V, max = +6.06 V) (beep)
-5V: +5.10 V (min = +5.10 V, max = +5.10 V) (beep)
V5SB: +6.85 V (min = +6.85 V, max = +6.85 V) (beep)
VBat: +4.08 V (min = +4.08 V, max = +4.08 V) (beep)
fan1: 0 RPM (min = 0 RPM, div = 128)
fan2: 0 RPM (min = 0 RPM, div = 128)
fan3: 0 RPM (min = 0 RPM, div = 128) (beep)
temp1: -1 C (high = -1 C , hyst = -1 C) sensor = thermistor
temp2: +0.0 C (high = +0 C, hyst = +0 C) sensor = thermistor
temp3: +0.0 C (high = +0 C, hyst = +0 C) sensor = thermistor
(beep)
vid: +1.419 V (VRM Version 11.0)
alarms:
beep_enable:
Sound alarm enabled
--
Seeya,
Paul
More information about the gnhlug-discuss
mailing list