need Openvpn routing help

[Neil Joseph Schelly]

This doesn't sound like an OpenVPN thing at all.  Does MachineB know that it's 
supposed to route traffic between it's 10.8.0/24 network and it's 10.10.0/24 
network?  If it knows that much, then OpenVPN doesn't have to be involved at 
all and you just add the route as you specified.
-N

On Friday 13 June 2008 13:03, Charlie Farinella wrote:
> I have 2 Openvpn clients.
> MachineA (10.8.0.6)
> MachineB (10.8.0.10)
>
> MachineA has 2 physical ethernet cards:
>     192.168.x.1
>     10.10.0.10
>
> I need to add a route from MachineB (10.8.0.10) to the second ethernet
> interface on MachineA (10.10.0.10).  My clients can see and connect to
> each other.
>
> I have set "route add -net 10.10.0.10 -netmask 255.255.255.0 10.8.0.6",
> but cannot ping the address and running traceroute doesn't show it using
> 10.8.0.6 as the gateway.  I have tried various permutations of the
> above with no luck and feel like I am missing an important part of this
> puzzle.
>
> If someone is good with Openvpn, I could use some help.
>
> thanks,
>
> --charlie