Networking help

[pll at lanminds.com]

Does this make sense to *anyone*?

This information is from a system currently not responding to pings
(as described previously in the thread).

# ifconfig   
eth0      Link encap:Ethernet  HWaddr 00:D0:A8:00:D6:DE  
          inet addr:192.168.10.11  Bcast:192.168.10.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:275555 errors:0 dropped:0 overruns:0 frame:0
          TX packets:276739 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:52875228 (50.4 MiB)  TX bytes:331924088 (316.5 MiB)
          Interrupt:10 

eth1      Link encap:Ethernet  HWaddr 00:D0:A8:00:D6:DF  
          inet addr:10.241.38.11  Bcast:10.241.38.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:10902420 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8356304 errors:0 dropped:0 overruns:10 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:2088329274 (1.9 GiB)  TX bytes:1876519092 (1.7 GiB)
          Interrupt:5 Base address:0x2000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:9818 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9818 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:21383856 (20.3 MiB)  TX bytes:21383856 (20.3 MiB)

# netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
10.241.38.0     0.0.0.0         255.255.255.0   U        40 0          0 eth1
192.168.10.0    0.0.0.0         255.255.255.0   U        40 0          0 eth0
0.0.0.0         10.241.38.1     0.0.0.0         UG       40 0          0 eth1
0.0.0.0         192.168.10.1    0.0.0.0         UG       40 0          0 eth0

# ping 168.159.36.90 
PING 168.159.36.90 (168.159.36.90): 56 data bytes
64 bytes from 168.159.36.90: icmp_seq=0 ttl=254 time=0.4 ms
64 bytes from 168.159.36.90: icmp_seq=1 ttl=254 time=0.2 ms

--- 168.159.36.90 ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.2/0.3/0.4 ms
bldsvr:~# ssh -l pll 168.159.36.90 
ssh: connect to address 168.159.36.90 port 22: No route to host

# traceroute 168.159.36.90 
traceroute to 168.159.36.90 (168.159.36.90), 30 hops max, 38 byte packets
 1  10.241.38.2 (10.241.38.2)  2.563 ms  0.452 ms  0.346 ms
 2  168.159.36.90 (168.159.36.90)  0.191 ms  0.208 ms  0.177 ms

-- 

Seeya,
Paul
--
Key fingerprint = 1660 FECC 5D21 D286 F853  E808 BB07 9239 53F1 28EE

	It may look like I'm just sitting here doing nothing,
   but I'm really actively waiting for all my problems to go away.

	 If you're not having fun, you're not doing it right!