FiOS/networking question

[Ben Scott]

On 11/19/06, Bruce Dawson <jbd at codemeta.com> wrote:
> Reconfigure the Linksys WRT54G to be an access point.

  As I recall, this is done mainly by (1) turning *off* the DHCP
server on the WRT54G (as that will now be done by the D-Link) and (2)
running a cable between the LAN side of the D-Link and the LAN side of
the WRT54G.  The WAN/Internet port of the WRT54G is unused.

-- Ben