FiOS/networking question

[Bruce Dawson]

Ben Scott wrote:
> On 11/19/06, Bruce Dawson <jbd at codemeta.com> wrote:
>> Reconfigure the Linksys WRT54G to be an access point.
> 
>  As I recall, this is done mainly by (1) turning *off* the DHCP
> server on the WRT54G (as that will now be done by the D-Link) and (2)
> running a cable between the LAN side of the D-Link and the LAN side of
> the WRT54G.  The WAN/Internet port of the WRT54G is unused.

Thanks Ben.

Am I getting the Linksys firmware confused with OpenWRT - where you have
to set a special mode to be an Access Point? Or am I losing it again?

--Bruce