Drill Press Local to Nashua/Amherst/Milford needed

[Chip Marshall]

On 2014-12-16, maddog at li.org <jonhall80 at comcast.net> sent:
> I need to drill some holes in the Acrylic during the week after
> New Years so I can put this all together. With luck this will
> take about an hour or so of time with a drill press, and the
> largest hole being 1/4" diameter, and some smaller holes for
> mounting disk drives, the Gbps switch.
> 
> If anyone has a small drill press in the greater Nashua, area
> .that I could use I would greatly appreciate it. I will show up
> with paper patterns made to show where to cut the holes.

Not sure if they have one, but I'd expect MakeIt Labs[1]
(Nashua's hacker space) to have that sort of thing available.

1. http://makeitlabs.com/

-- 
Chip Marshall <chip at 2bithacker.net>
http://2bithacker.net/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 203 bytes
Desc: not available
Url : http://mail.gnhlug.org/mailman/private/gnhlug-discuss/attachments/20141216/53a5a645/attachment.bin