FiOS/networking question

[jsf]

Thanks for your help everyone...

Greatly appreciated.

J.

On 11/19/06, Dan Jenkins <dan at rastech.com> wrote:
> Ben Scott wrote:
>
> > The LinkSys will have a LAN IP address you can point a browser to.
> > By default, it will be 192.168.1.1.  If that doesn't work, the easiest
> > thing to do is:
> >
> > 1. Unplug everything from the LinkSys
> > 2. Plug a single computer, set to be a DHCP client, into the LAN side
> > of the LinkSys
> > 3. Plug in power while holding down the RESET button (back panel,
> > recessed)
> > 4. After several seconds, you should see the LinkSys start cycling.
> > Let go of button.
> > 5. Tell your DHCP client to renew its lease.  It should get
> > 192.168.1.something.
> > 6. Point the client to http://192.168.1.1
> >
> >  You'll then be able to turn off DHCP on the LinkSys, and change it's
> > IP address to something appropriate for your LAN.  You can then plug
> > everything back into the LinkSys.
>
> The Linksys default username will be "admin" and the default password
> will be "password".
>
> --
> Dan Jenkins (dan at rastech.com)
> Rastech Inc., Bedford, NH, USA --- 1-603-206-9951
> *** Technical Support Excellence for over a Quarter Century
>
>